Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 

PTFE MS Lined Pipes and Fittings


PTFE MS Lined Pipes and Fittings PTFE MS Lined Pipes and Fitting
   
 
   
PTFE LINED PIPE, PTFE LINED 90° & 45° ELBOW
1) Dimentional Standards:
A) All dimensions are in mm otherwise specified
B) Pipes Confirms to ANSI B-36.10
C) Elbows confirms to ANSI B-36.9
D) Flange dimensions are as per ANSI B-16.5# 150. However Other standards like DIN, JIS, BS can be supplied as per individual custommers requirement.
E) Liner Thickness on raised will be 20% lower than specified above.
2) Material Construction:
A) Pipes & Elbow liner up to 150NB is from PTFE white liner confirms to standard resin Specification ASTM D-1457, ASTM D-4994 & 95 Type II. Pipes & Elbows of size 200 & above will be supplied either in FEP or PFA or PTFE depending on process liquid handled & as per standard resin specification. ASTM D-2116 & D-3307 Type II & III & ASTM D-1457, ASTM D-4994 & 95 respectively.
B) Pipes: Seamless Carbon Steel Pipe as per ASTM-A-106 Gr. B Sch 40.
C) Elbows: Ductile cast iron confirms to ASTM-A-395 or S.G. iron confirms to ASTM A-536 (60-4--18) or fabricated from pipe confirms to ASTM A-106 Gr, B Sch-40.
D) Flanges confirms to ASTM to 105 Gr, B or IS 2062. MS PTFE lined pipes are being supplied with one loose & other fixed flange & elbow with fixed flanges. However it can be supplied as per individual customers requirement.
E) A pair of vent holes are provided in each pipe & Elbow.
F) Pipes & Elbows can be supplied in SS as per individual Customers requirement.
 
FEP/PFA LINED EQUAL TEE, REDUCING TEE, CROSS

1) Dimensional Standards:
All dimensions are in mm otherwise & as per ANSI B 16.9.

2) Material of Construction :
A) Tee & Cross are supplied either in FEP or PFA lined depending on process liquid handled & as Per standard resin specification. ASTM D 2116 & ASTM D 3307 Type II respectively.
B) Ductile Cast ·lron confirms to ASTM A-395 or S.G .Iron confirms to ASTM A-536 (60-40-18).
C) Tee & Cross are being supplied with fixed flanges. However it can be supplied with loose flanges. As per individual customer's requirement 7 confirms to ASTM A-1 05 or IS-2062.

PTFE LINED REDUCER & REDUCING FLANGE
1) Dimensional Standards :
A) All dimensions are in mm otherwise specified & as per ANSI B 16.9
B) Flanges are drilled as per DIN, ASA, JIS orBS standards as per individual customer's requirement.

2) Material of Construction:
A) Reducers & Reducing flanges are from PTFE & as per Standard resin spec. ASTM D 1457 Type II & ASTM D-4894 & 5 Type-11
B) Fabricated are Seamless Carbon Steel Pipe as per ASTM-A-1 06 Gr,B & flanges confirms to ASTM A-105 OR IS 2062 Or Ductile Cast Iron confirms to ASTM A-395 or SG Iron confirms to ASTM A-536 (60-40-18).
C) Reducers are being supplied with fixed flanges. However it can be Supplied with Loose Flanges as per individual customer's requirement.
 
FEP/PFA LINED INSTRUMENT TEE & SIGHT GLASS

1) Dimensional Standards :
All dimensions are in mm otherwise specified & as per ANSI B16.9.

2) Material of Construction :
A) Tee & Sight Glass are supplied in FEP or PFA lined depending on process liquid handled & as Per standard resin spec. ASTM D 2116 & ASTM D 3307 Type II respectively.
B) Ductile Cast Iron confirms to ASTM A-395 OR S.G.Iron confirms to ASTM A-536 (60-40-18)
C) Tee & Sight Glass are being supplied with fixed flanges. However it can be supplied with loose Flanges as per individual customer's requirement & confirms to ASTM A-1 05 or IS-2062
 
PTFE EXPANSION BELLOW
1) Dimensional Standards :
A) All dimensions are in mm otherwise specified.
B) SS-304 reinforcing ring can be provided on request for vacuum application.
C) Flanges are drilled with standard like ASA, DIN, BS or JIS Depending on individual customer's requirement.

2) Material of Construction :
A) Flanges confirms to ASTM A-1 05 or IS-2062.
B) PTFE is as per Standard resin spec. ASTM D 1457 Type II & ASTM D-4894 & 5 type-11
Fluoro Polymers
ECTFE Lining  / ECTFE Coatings
PTFE Lining / PTFE Coating
PFA Lining / PFA Coating
FEP Lining / FEP Coating
Surface Preparation For Lining
Properties Of Various Fluoropolymers
FRP Reaction Vessel
PVDF Lining
Halar Lining
SO2 quench tower
Fabric Sheet Lining / Bonded Sheet Linings
Mechanical Bonded Lining / Un-Bonded Linings / Loose Linings
Fluoropolymer Coatings
PTFE MS Lined Pipes and Fittings
   

 
Home - Introduction:Fluoropolymer - Who We Are - Products - Enquiry - Contact Us Designed & Hosted By : MID  Promoted by : GID